VBET体育(中国官方认证)有限公司

Hotile: +86-574-8884 5144

Rubber and plastic compatibilizer series

Product List

Maleic anhydride grafted polyethylene 

Product introduction
1001H is a Maleic anhydride grafted polyethylene developed by Ningbo Haoxin Yuron New Material Co., Ltd. with a new process. The appearance is white or light yellow powder. The grafting rate of the material is higher than the traditional process on the market.

Performance

value

unit

testing method

density

0.91

g/cm3

ASTMD792

melt index (190℃/5KG)

2

g/10min

ASTMD1238

percent grafting

high

/

acid base titration

loss on drying

≤0.3

%

105℃, 10min


Note: The actual test value of the above resin slightly fluctuates, about 1% higher

Scope of application
1001H is mainly used in maleic anhydride graft PE for polyethylene plastic wood, filling master material, aluminum plastic composite, iron plastic composite, polyolefin/nylon system compatibility, film modification, etc, Can also be used for UV light curing coatings.

Packaging and storage
1001H 20KG/ bag, woven bag, inner plastic bag.
It needs to be stored under dry conditions, away from high temperature and ultraviolet radiation, if improperly stored, the performance of the material will be reduced.

[ Back ]
Copyright(C)2022,Ningbo Haoxin YURON New Material Co., Ltd. All Rights Reserved. Supported by ChemNet ChinaChemNet Toocle 31fabu Copyright Notice   浙ICP备05017910号
Baidu
sogou
体育开户(国际足联官方认证)有限公司 TCG彩票官方入口(华体汇)有限公司 世界杯冠军赔率|华体汇有限公司 真人场馆(欧洲马耳他认可的合法)有限公司 法甲投注(官方入口)有限公司 足彩下注软件(官方认证 )有限公司
VBET体育(中国官方认证)有限公司